About Scott Scale 930 2020
The Scott Scale 930 boasts a super light Carbon Fiber frame. FOX suspension, a SRAM Eagle drivetrain and Syncros components combine to create a lightweight and efficient racing machine.
Scale Carbon HMF Frame
FOX 32 Float Rhythm 100mm Fork
RideLoc 3-Position Remote
SRAM SX Eagle 12 Speed
Shimano Disc Brakes
Syncros X-25 TR Rims
WTB Ranger Kevlar Tires
Evo-Lap technology: With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, Scott’s choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up.
With FEA software, Scott can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables them to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments.
With their Evo-Lap technology they model the frame to optimize the surfacearea, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, they’ve optimized the carbon layers in all the parts of their frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology.
ICCR Cable routing: On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut.
SW Dropouts: On the Scale, Spark, Genius, Ransom and Gambler Scott have redesigned all the parts that can give them significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffnessand avoids damage to the frame in case of impacts on the rear derailleur.
29 Wheels: Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger.
Best Roll-Over Performance
Maximum Traction surface
Best stability on easy trails
Lowest suspension stress
Great for larger frame sizes
Increase stability on long curve
Frame: Scale 3 Carbon / IMP technology / HMF BB92 / SW DM dropouts for Boost 12x148mm SDS2 advanced Shock & Standing Damping System ICCR Cable routing
Fork: FOX 32 Float Rhythm Grip 3 / 3-Modes / 15x110mm QR axle / tapered steerer Reb. Adj. / Lockout / 100mm travel
Remote System: SCOTT RideLoc Technology / below bar remote 3 modes / integ. Grip clamp
Headset: Syncros Pro Drop in / Tapered 1.5″-1 1/8″ Bearing diameter size 42mm and 52mm
Handlebar: Syncros Fraser 2.0 / Alloy 6061 T shape Flat / 9° / 740mm Syncros Pro lock-on grips
Stem: Syncros FL2.0 6° / integrated Spacer & Top Cap 6061 Alloy / 31.8mm / 1 1/8″
Seat Post: Syncros Duncan 2.0 / 10mm offset 31.6x400mm
Saddle: Syncros Belcarra Regular 2.5
Shifters: SRAM SX Eagle Trigger
Rear Derailleur: SRAM SX / Eagle 12 Speed
Brakes: Shimano MT401 Disc 180/F and 160/R SM-RT10 CL rotor
Cassette: SRAM SX-PG1210 / 11-50 T
Chain: SRAM CN NX Eagle
Crankset: SRAM SX Eagle DUB Boost 32T
Bottom Bracket: SRAM DUB PF integrated / shell 41x92mm
Hubs: Fr: Shimano HB-MT400-B CL / 15x110mm Rr: Shimano FH-MT400-B CL / Boost 12x148mm
Spokes: Stainless Black 15G / 1.8mm
Rims: Syncros X-25 / 32H / 25mm Tubeless ready
Tyres: WTB Ranger / 2.25″ / 60 TPI / Aramid Bead / TCS Light Fast Rolling / Tubeless Ready
Approx. Weight: 11.50 kg